MICHIAKARI — ORIGINAL MOTORCYCLE SCENE MODELS These two scene objects are original geometry authored for this site. They are modeled visual interpretations of the Triumph Speed Triple 1200 RS and Aprilia RSV4 Factory. They are not factory CAD, photogrammetry, exact scans, manufacturer-supplied models, or a claim of affiliation/endorsement. No third-party motorcycle mesh or reference photograph is redistributed. Manufacturer names identify the depicted vehicles. Fine mechanical details, paint graphics and some shapes are approximations created for this scene. Both parked vehicles use the requested clean-tail configuration: no passenger footpegs, registration plates or plate-carrier assemblies. The rider rearsets remain. The RSV4 rear light/indicator units are removed with their carrier; the separate Triumph tail lamp remains. Reference dimensions/design sources (manufacturer publications, checked 2026-11-08; brake, radiator and specification scope rechecked 2026-11-09): Triumph Speed Triple 1200 RS: 1,445 mm wheelbase; 17-inch wheels; signature twin headlamps, exposed triple engine, three-into-one headers, gold inverted fork, aluminum twin-spar frame and single-sided rear swingarm. https://www.triumphmotorcycles.com/motorcycles/roadsters/speed-triple/speed-triple-1200-rs-2025 https://triumph-mediakits.com/en/news-articles/triumph-reveals-new-speed-triple-1200-rs-addictive-performance-and-razor-sharp-handling.html Aprilia RSV4 Factory scene scale (v24): 1,435 mm wheelbase; 17-inch wheels; sculpted full fairings, triple light signature, aerodynamic winglets, V4 engine, twin-spar frame, double-sided swingarm, dual 330 mm front discs and gold fork. The earlier 1,436 mm approximation from the base RSV4 sheet is superseded by original Swiss approval 6AA374, dated 2025-05-05, explicitly including XP RSV4 FACTORY B/00. The 2025 Factory sheet alone omits wheelbase. https://opendata.astra.admin.ch/ivzod/2000-Typengenehmigungen_TG_TARGA/2200-Basisdaten_TG_ab_1995/TG-Moto.txt https://wlassets.aprilia.com/wlassets/aprilia/au/tech-spec/aprilia_RSV4_en/original/aprilia_RSV4_en.pdf https://wlassets.aprilia.com/wlassets/aprilia/us/tech_spec/2025/RSV4_Factory_tech_spec_EN_US-%281%29/original/RSV4_Factory_tech_spec_EN_US%2B%281%29.pdf Asset search outcome: An exact 2013 Triumph Speed Triple scan offered under CC BY requires an unavailable authenticated download. The found downloadable exact Aprilia RSV4 asset has a noncommercial restriction and was not used. No game-ripped model, noncommercial mesh, unrelated Aprilia model or generic downloaded motorcycle has been substituted. REFINEMENT REFERENCE AUDIT — 2026-11-08 The focused refinement uses the 2025 Speed Triple 1200 RS design (Jet Black interpretation) and 2025 RSV4 Factory Dark Kraken design. Neither is asserted to be exact factory CAD. Shape and graphic details remain approximations. Additional public manufacturer photo sources consulted locally: https://press.piaggiogroup.com/en_EN/post/show/308733/new-aprilia-rsv4-and-rsv4-fact.html The Factory front, left/right three-quarter and side studio views in that release show a black swept front cowl, angular perimeter-lit headlamp units, red integrated stacked aero surfaces, a mostly black full fairing with a low belly pan, a two-tone saddle, gold fork, five split spokes and the long angular stock exhaust. The official technical sheet confirms five split spokes on both Factory wheels. The base RSV4's three-spoke wheels were not used. https://www.triumphmotorcycles.com/motorcycles/roadsters/speed-triple/speed-triple-1200-rs-2025 The public model-page close-ups show mirrored teardrop headlight housings, steep diagonal LED strips, a compact brow, sculpted tank shoulders, curved frame rails, short side exhaust and the single-sided rear swingarm. These reference photographs are saved only as internal modeling references; they are not embedded in the public site, used as model textures, or offered as downloads. Body lettering is generated from text on the modeled surfaces. The internal pre-refinement code/render checkpoint has been preserved. The follow-up side-view pass flattened the rider saddles, shortened the tail sections, separated the compact pillion pads, and lowered/narrowed the RSV4 clip-ons below the yoke. The Triumph retains its raised wide handlebar. These changes were visually checked against the same stock manufacturer references; they do not change the original-model/approximation disclosure above. The final side-silhouette pass used visible landmarks in the official Dark Kraken studio side photograph, scaled by the published axle spacing. This is manual visual guidance with perspective and edge-selection uncertainty, not a dimensional survey. It informed the fairing scoop, engine-cover reveal, belly sweep, shorter exhaust and angular frame/air-extractor junction. The modeled brake-disc perforations are actual mesh openings. Tire sipes are shallow recesses in the tire surface, rather than lines floating above it. The wider RSV4 lettering and red tank graphics are generated locally from text and authored shapes; no source photograph is used as a model texture. FRONT BRAKE REFERENCE PASS — 2026-11-08 The 2025 Triumph front calipers are interpreted as Brembo Stylema, while the 2025 RSV4 Factory uses Hypure. Their cast bodies, open pad slots, bridges and fork-foot mounting details are original approximate geometry. The RSV4 front discs use Brembo's documented 330 × 5 mm dimensions; Triumph retains the previous scene thickness because an official model-specific thickness was not established. Rear brake details remain approximate and unchanged. https://www.brembo.com/en/solutions/for-original-equipement-bike/references/aprilia-rsv-4 https://www.brembo.com/en/solutions/for-original-equipement-bike/icons/stylema-caliper https://www.brembo.com/en/solutions/for-original-equipement-bike/icons/hypure-caliper https://www.brembo.com/en/solutions/news/hypure-painted-caliper Tyre sipes remain an original generic pattern, not a reproduction of a factory Pirelli tread. This pass does not claim a verified tread-direction correction. https://www.pirelli.com/tires/en-us/motorcycle/catalog/product/diablo-supercorsa-v3-sp-new RADIATOR SURFACE PASS — 2026-11-08 The dark fine-core appearance follows official 2025 motorcycle photographs, including the RSV4 Factory front three-quarter view in the Piaggio release linked above. The recessed folded fins and coolant-tube spacing are authored scene geometry, not measured factory dimensions. They stay inside the prior radiator envelope and follow its existing tilt. Engine, fairing, brake and wheel geometry are unchanged by this surface pass. BODY, OPTICS AND CASTINGS PASS — 2026-11-12 The manufacturer photographs linked above were compared with front, side and three-quarter renders of the actual scene geometry. The Triumph now has continuous shaped frame spars, asymmetric layered engine cases, hose and fastener details, revised tank shoulders and knee recesses, and deeper twin headlamp housings with separate reflector bowls and clear covers. The RSV4 lamp covers are shallower, and their perimeter bezels have open centers so the separate rectangular reflector compartments remain visible. Tank shoulders, knee recesses, mirror-shell normals and silencer finish/seams were refined. The lamp internals and casting shapes are photo-guided authored approximations, not measured manufacturer components. The tire pattern, body-panel contours and some mechanical details remain simplified. The display configuration omits passenger pegs and numberplate carriers on both bikes. The 2025 RSV4 rear light/indicator units are integrated into its removable carrier, so that entire assembly is omitted. The separate Triumph tail lamp and both bikes' rider rearsets are retained. https://press.piaggiogroup.com/en_EN/post/show/308733/new-aprilia-rsv4-and-rsv4-fact.html https://triumph-mediakits.com/en/news-articles/triumph-reveals-new-speed-triple-1200-rs-addictive-performance-and-razor-sharp-handling.html SURFACE FINISH PASS — 2026-11-12 The motorcycles distinguish clear-coated paint, satin body panels, coated castings, bare brushed aluminum, polished fork sliders, upholstery and composite trim. Fine normal maps are generated deterministically from code; they add small-scale finish variation to real modeled surfaces. No motorcycle photograph is projected over a simplified body. The five finish maps are shared by both bikes to limit the photo renderer's texture-array allocation. Color, roughness and reflection values are artistic approximations guided by the manufacturer photographs, not measured material samples. The parked motorcycle lamp strips and tail lens are unlit, with light from the scene reflected by their separate modeled housings and clear covers. BODYWORK AND PROPORTIONS PASS — 2026-11-12 The follow-up comparison used equal front, side and three-quarter rendering angles against the published v14 model and the same manufacturer photographs. Triumph changes include flatter cast frame webs, fitted radiator shrouds, a shaped belly pan, saddle/tail transitions, a seated filler cap, and a tank side surface that carries both lettering lines without the knee pad covering them. The subframe and indicator mounts connect to their supporting parts. Aprilia changes include a more coherent tank/seat relationship, compound- curved fairing panels with separate borders, fitted upper shoulders, solid cambered stacked aero surfaces, recessed intake ducts, and an enclosing belly pan with a smaller exhaust-side relief. The tire contacts and wheelbase are retained. Both bikes remain original visual approximations, with simplified mechanical components and body contours; this is not a factory-CAD or exact photogrammetric reconstruction. ENGINE AND MECHANICAL PASS — 2026-11-12 (v16) The published v15 models were compared with the same manufacturers' 2025 side photographs and engine close-ups. The new parts are authored closed surfaces and physical hardware, not image cards or projected bike pictures. The Triumph has distinct curved clutch and generator housings, stepped covers, blended cylinder/head castings, seated socket fasteners, connected water-pump and coolant plumbing, rounded radiator tanks, seated three-into-one header necks and a solo silencer support connected into the retained frame. The Aprilia has asymmetric V4 cover and crankcase shapes, integrated cast webs, an auxiliary housing and lower water pump, fitted coolant connections and engine mounts, with more closely fitted frame/tank/tail transitions. Both bikes have 43 mm slider geometry, stepped fork caps and dust seals, contoured axle feet, open yokes, a separate shock body/shaft/spring assembly, tapered split-spoke castings, shaped rider rearsets and distinct left shift linkage/right rear-brake controls. A closed chain loop uses modeled side plates, rollers, rivets and toothed sprockets on both runs and wrap arcs. Invisible pin bores covered by rivet heads are omitted to reduce geometry. The rider pegs remain; passenger pegs and numberplate mounts remain absent. Wheelbase, tire shapes, parked contacts and the surrounding scene are retained. Engine shape depths, hardware dimensions, materials and internal routing are visual approximations where photographs do not provide measurements. The result is more detailed but remains an authored model, not a claim of exact factory reconstruction or achieved photographic equivalence. BODYWORK AND CAST-SURFACE PASS — 2026-11-12 (v17) The same manufacturer reference photographs guide this original mesh pass. Triumph tank shoulders, knee transitions and the enclosing tail shell are reshaped; its engine covers use shallower faces with defined flange steps. Triumph radiator shrouds retain a closed reference panel, thin accent and folded inward edges; no unverified vent aperture is added. Its belly pan has a continuous upper return and fitted mounts, rather than detached cheeks. The Aprilia has a flatter crown and angular tank shoulders, a thicker fitted saddle and enclosing tail shell, thinner fairing relief, wrapped radiator returns, and shorter shallow cast webs joining the engine-cover lands. Both bikes share filtered fine casting normal grain and one additional small roughness map. This varies the finish of the real modeled engine and chassis surfaces; it is not a photograph, a dirt overlay or baked mechanical detail. The authored relief and reflection values are approximations, not measured manufacturer material samples. Projected identity and tank graphics are bounded to their print rectangles in the mesh geometry. This prevents repeat-wrapped photo-renderer texture arrays from duplicating the graphics outside their intended regions. Both models retain the requested solo configuration, without passenger footpegs or registration-plate carriers. FRONT BODYWORK PASS — 2026-11-13 (v18) Manufacturer front, side and three-quarter photographs linked above guided this bounded original-mesh pass. The Speed Triple retains its naked roadster layout: a continuous compact headlight brow and thin carrier returns replace the two separate open brow skins. Its lamp optics, radiator shrouds and v17 mechanical and bodywork details are retained. The RSV4 has thin closed nose, cockpit-side and lamp-to-intake shells with fitted seams, a smoothly curved windshield with physical edge thickness, and cambered stacked aero surfaces with matching wrapped end returns. The red lower foil meets across the center and tucks closer under the nose. Closed mirror casings have smoother rolled contours around the retained glass and stalk locations. Existing headlamp reflectors, lenses and running strips are retained; the cowl graphics are re-seated on the revised front surface. Both models keep their prior tire geometry, parked contacts, engine parts, solo configuration and absence of passenger pegs and numberplate carriers. These are photo-guided procedural shell shapes, not manufacturer CAD, measured panel tooling or a claim of photographic equivalence. Manufacturer photos were used only for private visual comparison; no motorcycle photograph, new photo texture or downloaded motorcycle model is included in the site. FACTORY DIMENSION AUDIT — v24, 2026-11-14 Model identities: 2025 Triumph Speed Triple 1200 RS and 2025 Aprilia RSV4 Factory Dark Kraken. Measurements use the upright bike on a flat ground plane; parked lean and a deployed stand are not factory width/height inputs. Both retained mirrors, rider pegs and the clean-tail configuration. Triumph primary 2025 launch specifications: Wheelbase 1445 mm; width 810 mm (handlebars); height 1085 mm without mirrors; rider seat 830 mm; complete-stock length 2090 mm. Rake 23.9 degrees, trail 104.7 mm. Front/rear rims 17 x 3.50 /17 x 6.00 inches (cast aluminium); tires 120/70 ZR17 and 190/55 ZR17; fork sliders 43 mm; brake discs 320 mm front and 220 mm rear. https://triumph-mediakits.com/en/news-articles/triumph-reveals-new-speed-triple-1200-rs-addictive-performance-and-razor-sharp-handling.html Earlier 1200 RS values 792/1089 mm were excluded as the wrong model-year specification. Aprilia original approval 6AA374, dated 2025-05-05, no approval extensions: XP A/00 RSV4 / B/00 RSV4 FACTORY; wheelbase 1435 mm, length 2055 mm, width 750 mm, height 1165 mm. This original TARGA record avoids relying only on the later 2026 revision of the TAS record. A high windscreen is optional; the scene models the standard fixed screen. https://opendata.astra.admin.ch/ivzod/2000-Typengenehmigungen_TG_TARGA/2200-Basisdaten_TG_ab_1995/TG-Moto.txt Under the applicable measurement definitions, the bike is upright with straight wheels, running-order mass and recommended tire pressures. Width and height include fixed components, excluding rear-view mirrors. https://eur-lex.europa.eu/eli/reg_del/2014/44/2018-03-20/eng 2025 metric Factory sheet: seat 840 mm,17 x 3.50 /17 x 6.00 forged rims, 43 mm forks,330/220 mm discs. Pirelli 2025 fitment and the approval record corroborate 120/70 ZR17 front and 200/55 ZR17 rear. https://tyre24.pirelli.com/moto/assets/pirelli/pdf/global/TDB/CATALOGO_PIRELLI_2025_PT.pdf https://wlassets.aprilia.com/wlassets/aprilia/at/tech_spec/2025/RSV4_Factory_tech_spec_DE/original/RSV4_Factory_tech_spec_DE.pdf https://wlassets.aprilia.com/wlassets/aprilia/us/tech_spec/2025/RSV4_Factory_tech_spec_EN_US-(1)/original/RSV4_Factory_tech_spec_EN_US%2B(1).pdf Actual v 24 corrections: - Revised rear tires from 626 mm to nominal 640.8 mm Triumph /651.8 mm Aprilia. Front nominal OD 599.8 mm; nominal section widths 120 /190 /200 mm. - Built closed rim barrels with 431.8 mm bead-seat diameter and 88.9 /152.4 mm nominal rim widths. Visible flange OD 447.8 mm is an authored allowance, not the 17-inch bead-seat measurement. Spoke tips seat into the barrel. - Each axle sits at its own nominal radius; chain path, sprocket, fork feet, wheel/brake hubs, swingarm and hugger follow the corrected centers. - Rider seats fit 830 /840 mm using the minimum central top surface at X 0, authored Z[-.52,-.24]. This is an explicit proxy: the factory sheets do not publish a seat sampling point or sag/loading tolerance. - Triumph higher cockpit reaches 1085 mm excluding mirrors, with 810 mm grip/bar span. Paired forks follow 23.9 degrees and a separate steering axis produces 104.7 mm nominal trail. The approximately 25.8 mm fork offset is derived from these values and nominal tire radius, not a published fork-part dimension. Riser and steering-head geometry is authored. - Aprilia controls move rigidly outward to the 750 mm fixed-component envelope; fork clamps and cowl-mounted mirrors stay in place. Standard screen top drops 35 mm to 1165 mm, with its complete lower fixing edge fixed. - Existing 43 mm sliders and 320/330/220 mm brake diameters were already correct and retain their dimensions. No passenger pegs or plate mounts. Limits: tire OD/radius is designation arithmetic, not measured loaded tire size, manufacturing tolerances, or suspension sag. In particular, the Aprilia nominal tire envelope 1435+299.9+325.9=2060.8 mm exceeds the 2055 mm complete-stock approval length. These inputs cannot all be exact physical measurements simultaneously; stock length was not enforced by distorting tires or stretching the carrier-deleted tail. No factory clean-tail length is available. Rake/trail for this exact 2025 Aprilia configuration remain unverified and are not borrowed from another model/year. Panel contours, engine castings, tire tread, flange shape and materials remain authored interpretations; dimensional QA is not a claim of OEM CAD or photorealism.